2015年11月5日星期四

60*60cm Flat Led Panel Light Square Recessed Ceiling Mounted Suspended Led Ceiling Light Fixtures 600*600mm

60*60cm Flat Led Panel Light Square Recessed Ceiling Mounted Suspended Led Ceiling Light Fixtures 600*600mm

Description:
LED panel light is a brand new product which is based on LED Light for commercial lighting and home lighting. With unique design, LED panel can be hanged on the roof or mounted to the walls or on the surface of other objects. It is also great for decorative lighting.
Zedu LED panels is a perfect replacement for traditional fluorescence tubes that are often used with suspended ceilings. Round or Square LED panel light utilizes the high power LED for practical solution to general overhead room and office lighting.
SPECIFICATIONFEATURESHANDLES AND CLOSURESREQUEST A FREE SAMPLE
36W 48W 60W 72W 600*600mm SMD2835 Flat Led panel light Square Ceiling Mounted/Suspended/recessed Led Panel Ceiling Light fixtures 60*60cm recessed Led downlight Ceiling light fixtures Hi-Bright Lamp PF>0.9 CRI>80 CE RoHS TUV
Application: Hotel, Shopping Mall, Exhibition Hall, Offices, Conference Room, Schools, Universities, Airport Station, Hospital, School, Factory, etc.
Technical Parameter
No Parameter
01 Input Voltage AC 110-277V(UL) AC100-240V(CE)
02 Working Voltage ≤36V
03 Input Power □27W □36W □42W □48W □54W □72W
04 Luminous □27W 2300 lm □36W 2900 lm □42W 3300 lm □48W 3800 lm □54W 4300 lm □72W 5600 lm
05 Power Efficiency □27W 77 lm/w □36W 75 lm/w □42W 76 lm/w
□48W 75 lm/w □54W 75 lm/w □72W 75 lm/w
06 Color Up to request
07 Color Temp □WW / Warm White 2800-3500K □NW / Natural White 4000-4500K
□W / White 5000-5500K □CW / Cool White 6000-6500K
08 CRI 3014 ≥72 5630≥80
09 LED Qty 3014 □27W 264 PCS □36W 352 PCS □42W 418 PCS
□48W 484 PCS □54W 528 PCS □72W 704 PCS
5630 □36W(40W) 88 PCS □48W 100 PCS
□54W 120 PCS □72W 176 PCS
10 LED Type SMD2835/5630
11 Life Span 50000 Hours
12 Operating Temp -20ºC — 50ºC
13 Storage Temp -20ºC — 60ºC
14 Net Weight 4.0 Kg
15 Gross Weight 4.5 Kg
16 IP IP 40
Attention on Installation:
1. Panel lights should be installed by trained electronic technician.
2. Please check all the accessories when open the cartons.
3. The distance between the light and any flammable materials must be more than 0.2m. The distance between the upper part of the installed light and the ceiling must not be less than 2 cm. Don not install into ceilings or walls that contain heat source. The main cable must not connect with the low voltage cable or the surface-mounted lights.
4. Guide the lights’ connecting cables through the drilled hole, and fix the surface-mounted lights with the pre-fitted clips. Make sure that these are securely connected to the base material.
5. When laying the cables, make sure that the cables and plugs are not subjected to any tensile or twisting forces. Do not kink cables. Output cables should be laid separately and at a distance from other cables.
6. After installation, connect the transformer to the mains supply
7. Proceed by connecting the wiring cables to the lights. Usually, the brown (or black) wire is the Live wire, connect it with the terminal marked “L”. The blue wire is Naughty wire; connect it with the terminal marked “N”.
8. Use the dedicated LED drivers only, do not connect to other loads
9. Do not remove the label of the lights and drivers.
Notes on Using:
1. Please always use the light out of its package.
2. Before starting use of the light, please check if the light was damaged during transportation. If any damage shown, please DO not install or use it.
3. Any maintenance should be performed by trained professionals only.
4. Keep packaging material away from the reach of children and pets.
5. Caution: Keep children away from the lights, there are some small components that may be swallowed by children, and never allow them to play with electronical devices.
6. Try to avoid looking directly at lights for a long time. Do not shine the LED light in another person’s eyes.
7. Never cover the lights by other objects
8. Keep the panel light away from the flames or heat sources.
9. The lights should be inspected repaired or special treatment if beyond service time.
10. Non-professionals are not allowed to disassemble and maintain the products. We have the right not to provide after-sale service if unauthorized disassembly and maintenance happens to the products.
Maintenance:
1. Before to clearing the panel lights, please make sure it have been powered OFF.
2. Use a dry or slightly moistened cloth for cleaning.
3. Never use any chemicals or abrasives for cleaning.

Next: 

没有评论:

发表评论